Move Up
Revision
Number
Published
Date
Effective
Date
Title
Original 01/20/2016 01/20/2016  APPLICATION OF TARIFF RATE BASIS & CALCULATION OF CHARGES
Displaying: Original Published Date: 01/202016

 

 


 

RULE: 2.2  APPLICATION OF TARIFF RATE BASIS & CALCULATION OF CHARGES 
Effective 1/20/2016         
 
 
Except as otherwise provided in individual Tariff Rules, Algorithms or TLIs, rates and charges named in this Tariff are stated in U.S. Currency and apply per weight unit, per measurement unit, per container or lump sum per shipment as specified.  Calculation of freight and additional charges will be based upon the applicable rate, times the number of units tendered for transportation, subject to the provisions named below.       
 
a. Rates and/or additional charges stated on a weight unit basis ("W") apply per weight unit of 100 pounds        
 
   i. Freight and additional charges on shipments subject to rates or charges stated on a weight unit basis will be computed on the gross weight of the cargo PLUS the weight of all packing materials, pallets or shipping containers (exclusive of the weight of the ocean container) established at the time cargo is tendered for transportation at origin.        
 
  ii. Carrier reserves the right to weigh or reweigh, on certified scales, any cargo tendered for shipment. Any weight so ascertained by the Carrier shall be deemed paramount and shall be used to compute freight and additional charges regardless of any other weight, certified or otherwise, declared or provided by the Shipper or his agent.  Shipper may however at his own expense, seek independent certification of the accuracy of any scales utilized by the Carrier.       
 
b. Rates and/or additional charges stated on a measurement unit basis ("M") apply per measurement unit of 1 cubic foot.                  
 
   i. Freight and additional charges on shipments subject to rates or charges stated on a measurement unit basis will be computed on the overall measurement of each piece, package or unit in the shipment.  The cubical content of each piece, package or other unit   shall be the extreme dimensions of the length, width and height of such piece, package or unit.        
 
  ii. Before any other calculations are made all fractional centimeter or inch dimensions will be disposed of as follows:          
 
    1. All fractions of less than one-half centimeter/inch shall be dropped. 
         
    2. All fractions of one-half centimeter/inch or more shall be rounded up to the next full centimeter/inch.       
 
  iii. When calculating freight and additional charges of an irregular or unusually shaped piece, package or unit, the 3 (three) greatest dimensions shall be used as the rating measurements. When calculating freight and additional charges of Barrels, Casks, Kegs, Drums or other cylindrical shipping units, measurements shall be taken on the square of the bilge.        
 
   iv. Whenever an individual piece, package or other shipping unit is tendered for transportation and it is requested by Shipper, or is necessary because of the nature of the cargo or its packaging, that no cargo bestowed on top of same, Carrier will use the maximum inside height dimension of the transporting container as the height of the cargo when calculating the freight or assessorial charges.       
 
c. Rates and/or additional charges stated on an alternating weight unit or measurement unit apply per the weight or measurement unit, defined in Rule 2.2 paragraphs a. or b. above, whichever produces the greatest revenue to the Carrier.       
d. Rates and/or additional charges stated on a per container basis ("PC") apply per single container by capacity and type as defined below:         
 
 CODE     CONTAINER TYPE         
 ----------------------------------------------------     
 
   AC    Atmosphere Control Container          
   CG    Gas Cylinder     
   CP    Collapsible Container           
   
   DF    Drop Frame Flat Bed                   
   DV    Dry Van Container     
   FB    Flat Bed        
                   
   FC    Collapsible Flat Rack     
   FR    Flat Rack                    
   GC    Garment (GOH) Container                  
   
   HH    Half-Height                  
   HS    High Stress Container     
   HT    High Top, Open Top Container           
 
   IN    Insulated Container                   
   MP    Mafi Flatrack/Platform     
   OT    Open Top           
 
   PC    Dry Van Container     
   PL    Platform     
   RE    Refrigerated (Reefer) Container           
 
   RN    Non-Operating Refrigerated (Reefer) Container     
   TC    Tank Container     
   TL    Top Loader Container           
 
   TR    Trailer (On Wheels)     
   VR    Vehicle Rack     
   VT    Ventilated Container    
 
  ----------------------------------------------------          
 
  SIZE                           I     SIZE    
  CODE     CONTAINER SIZE        I     CODE     CONTAINER SIZE    
  -------------------------------I--------------------------------     
   10X   10ft. long, any height  I   LTL   Less Than Load     
   20    20ft. long, 8'6"high    I   43    43ft. long, 8'6"high     
   20S   20ft. long, 8'0"high    I   43S   43ft. long, 8'0"high     
   20A   20ft. long, 9'0"hicube  I   43A   43ft. long, 9'0"hicube     
   20B   20ft. long, 9'6"hicube  I   43B   43ft. long, 9'6"hicube     
   20X   20ft. long, any height  I   43X   43ft. long, any height                                                                           
                                 I
   24    24ft. long, 8'6"high    I   45    45ft. long, 8'6"high     
   24S   24ft. long, 8'0"high    I   45S   45ft. long, 8'0"high     
   24A   24ft. long, 9'0"hicube  I   45A   45ft. long, 9'0"hicube     
   24B   24ft. long, 9'6"hicube  I   45B   45ft. long, 9'6"hicube     
   24X   24ft. long, any height  I   45X   45ft. long, any height                                     
                                 I 
   35    35ft. long, 8'6"high    I   48    48ft. long, 8'6"high     
   35S   35ft. long, 8'0"high    I   48S   48ft. long, 8'0"high     
   35A   35ft. long, 9'0"hicube  I   48A   48ft. long, 9'0"hicube     
   35B   35ft. long, 9'6"hicube  I   48B   48ft. long, 9'6"hicube     
   35X   35ft. long, any height  I   48X   48ft. long, any height                                   
                                 I    
   40    40ft. long, 8'6" high   I   42    42ft. long, 8'6"high     
   40S   40ft. long, 8'0" high   I   42S   42ft. long, 8'0"high      
   40A   40ft. long, 9' high     I   42A   42ft. long, 9'hicube     
   40B   40ft. long, 9'6" high   I   42B   42ft. long, 9'6"hicube     
   40X   40ft. long, any height  I   42X   42ft. long, any height    
  --------------------------- ---I--------------------------------       
 
e. Rates and/or additional charges stated on a lump sum basis apply per a single complete unit or shipment not exceeding a specified maximum weight or measurement unit or a maximum number of containers.{C}       
f. Rates and/or additional charges stated on a per Each "D Container" basis apply per a single D Container (including pallet) not exceeding a measurement of 58" x 42" x 46" with a maximum cubic carrying capacity of 65 cft. {C}       
g. Rates and/or additional charges stated on a per Each "E Container" basis apply per a single E Container not exceeding a measurement of 42" x 29" x 26" with a maximum cubic carrying capacity of 19 cft.      
 
h. Except as otherwise provided, when the rates named in this Tariff are based on the value of the cargo, such cargo value will be the F.O.B. or F.A.S. value at the    
   POL as indicated on the Commercial Invoice, the Custom's Entry, the Export Declaration or the Shipper’s Certificate of Origin.  The F.O.B. value and the F.A.S. value shall include all expenses up to delivery of cargo at POL.       
 
i. CORRECTIONS IN WEIGHT AND/OR MEASUREMENTS:  All freight and assessorial charges billed on the basis of weight and/or measurement are in all cases SUBJECT to revision and correction if the weights and/or measurements are found to be incorrectly stated or declared regardless of the party responsible for the original error.